Split System Air Conditioning Burwood
Split System Specialists — Burwood

Split System Air Conditioning in Burwood

Postcode 2134 · Sydney Inner West

Wall-mounted split system installation in Burwood. 2.5 kW to 9.0 kW. All major brands. From $2,700 fully installed.

Licensed Technicians 5-Year Warranty Same-Week Install Free Quote

Split System Prices — Burwood

SizeBest ForInstalled Price
2.5 kWBedroom (up to 15 m²)$2,700
3.5 kWMaster bedroom (15–25 m²)$2,900
5.0 kWLarge bedroom / small living (25–35 m²)$3,200
6.0–7.0 kWOpen-plan living / kitchen (35–50 m²)$3,600
8.0–9.0 kWLarge open-plan area (50–70 m²)$4,200

Prices are supply and install, including all electrical work and 5-year manufacturer warranty. Contact us for exact pricing for your home.

Split System Installation in Burwood (2134)

Burwood (2134): split-system selection starts with the room's size, insulation, glazing and airflow needs. For an older or renovated building, inspect insulation, glazing, ceiling space and available electrical supply.

Burwood is identified in the NSW Spatial Services suburb boundary dataset. The mapped locality reference uses postcode 2134. The representative point in the Burwood boundary falls within BURWOOD COUNCIL. This is a locality reference, not confirmation of a particular property's council or approval requirements. Nearby covered localities, measured between representative mapped points, include Croydon, Burwood Heights, Enfield.

Burwood: the housing evidence behind this assessment

These are the ABS 2021 figures for Burwood (NSW), not a count of today's housing stock or a survey of your property. The profile reported 6,721 occupied private dwellings over a census area of 2.446 km². Separate houses numbered 1,427 (approximately 21.2%), semi-detached/row/terrace/townhouses 629 (approximately 9.4%), and flats/apartments 4,536 (approximately 67.5%).

The Census uses privacy adjustments, so component counts can differ slightly from totals. Small or suppressed counts are not evidence of a specific building type. Dwelling structure does not establish roof space, insulation, equipment capacity, building age or an individual home's ownership.

ABS 2021 Burwood (NSW) profile

Condenser and indoor-unit planning for Burwood

Burwood (NSW) recorded 321 apartments in one/two-storey blocks and 1,871 apartments in blocks of nine or more storeys. These are different access settings, not different automatic kW recommendations. For the actual building, agree on installation access, the lawful condenser position and maintenance access before ordering.

Apartments are the largest of these reported structure categories. Start with the building's approved equipment positions, common-property rules and service routes before choosing ducted, single-split or multi-head equipment. An apartment count does not establish any individual building's approval. The indoor unit should condition the room you intend to use: record floor area, glazing, shading, orientation and open connections to other spaces. Apartment or house counts cannot replace that heat-load information.

Single split, several splits or multi-head in Burwood?

The local reference profile includes 629 attached dwellings as well as 4,536 apartments. Where outdoor space is constrained, a multi-head arrangement may be worth comparing, but it still needs approved positions, manufacturer-compliant pipe routes and adequate simultaneous capacity.

The tenure table recorded 3,967 rented dwellings in Burwood (NSW). For your own tenancy, obtain written authority before external work. For owner-occupied shared buildings, confirm strata/common-property requirements. A room-only split quote should not silently include—or exclude—the approvals and drainage work needed for the chosen position.

Why a Croydon quote is not automatically a Burwood design

Nearby mapped locality Croydon has a different 2021 reference profile: 2,032 separate houses and 997 apartments, compared with 1,427 and 4,536 in Burwood (NSW). The comparison is historical housing context, not a road-distance calculation or a heat-load comparison.

Use a nearby installation as a question to ask, not a copied specification. Room exposure, private/common-property routes, controls and included installation work must be matched at the actual address.

ABS source for the Croydon (NSW) comparison

Locality evidence: NSW boundary records or the cited public authority. Council references describe the mapped locality, not the approvals for an individual address.

If a bedroom door is normally closed, do not count it as cooled simply because the adjacent living room has a split. Mark the rooms you expect to use at the same time, then ask for a design that serves those spaces.

In the Sydney Inner West, split systems are particularly suited to: Compare viable duct routes with discrete split-system locations and preserve safe maintenance access.. For an older or renovated building, inspect insulation, glazing, ceiling space and available electrical supply. Confirm indoor and outdoor model numbers, compatible controls and the installed scope before choosing a system.

What's Included in Every Split System Installation

Indoor wall unit (selected brand and kW)
Outdoor compressor unit
Refrigerant line set & electrical wiring
Wall penetration and weatherproofing
Condensate drain connection
Refrigerant charging and system commissioning
5-year manufacturer warranty
System operation walkthrough

Our Top Split System Pick for Burwood

For an older or renovated building, inspect insulation, glazing, ceiling space and available electrical supply. Confirm indoor and outdoor model numbers, compatible controls and the installed scope before choosing a system.

Mitsubishi Electric
View pricing & specs

When a Split System Is the Right Choice

Apartments & Units

No roof space for ducted? A split system delivers efficient cooling and heating with minimal installation disruption.

Single Rooms

Cool or heat just the room you're in — ideal for bedrooms, home offices, or living rooms in period homes.

Quick to Install

Typically installed in 2–4 hours — no major construction, no roof access, minimal mess.

Budget-Friendly Entry

Start with one unit and add more over time. Lower upfront cost than a full ducted system.

Split System FAQ — Burwood

How much does a split system air conditioner cost in Burwood?

Split system installation in Burwood starts from $2,700 for a 2.5 kW unit — supply and install, including all electrical work and 5-year manufacturer warranty. Larger 6–8 kW units for open-plan areas cost $3,600–$4,200 installed. Contact us for an exact price for your room size and preferred brand.

What size split system do I need in Burwood?

For Burwood rooms: bedrooms (up to 15 m²) need 2.5 kW; master bedrooms (15–25 m²) need 3.5 kW; larger rooms (25–35 m²) need 5 kW; open-plan living (35–50 m²) needs 6–7 kW. We confirm the right size for your specific room dimensions at the quote stage.

How long does split system installation take in Burwood?

A single split system in Burwood typically takes 2–4 hours. Multiple units on the same day take proportionally longer. The system is commissioned and ready to use on installation day.

Which brand split system is best for Burwood?

For Burwood in the Sydney Inner West, our top pick is Mitsubishi Electric. We install all 6 major brands — Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, Fujitsu, Samsung, and ActronAir — and advise the best match for your room and budget.

Can I get a multi-head split system in Burwood?

Yes. A multi-head split system uses one outdoor unit connected to 2–5 indoor units across different rooms. This is a cost-effective alternative to ducted AC for apartments and smaller homes without roof space for ductwork. We install all major multi-head brands including Daikin, Mitsubishi Electric, and Samsung.

Is a split system or ducted system better for a Burwood home?

If you want to cool the whole home from one system with no visible wall units, ducted is the better choice. If you're cooling one or two rooms, or your home has no suitable roof space for ductwork, a split system is the right answer. We can advise the best option for your specific Burwood property at the free quote.

Do I need council approval for split system air conditioning in Burwood?

Exempt development is conditional. Check the proposed equipment position, property constraints and applicable NSW standards for the actual address before agreeing to installation. Ask the council if the planning pathway is unclear. For strata or rented premises, confirm any separate permission needed from the owners corporation or owner.

How much does a split system cost to run in Burwood?

A 2.5 kW split system in Burwood costs approximately $0.30–$0.50 per hour at current Sydney electricity rates — around $2–$4 per day for 8 hours of use. A 7 kW unit costs $0.80–$1.20 per hour. All modern inverter systems adjust output rather than cycling on and off, significantly cutting electricity consumption compared to older units.

What warranty comes with split system installation in Burwood?

All split systems we install in Burwood include a 5-year manufacturer warranty on parts and labour — Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, Fujitsu, Samsung, and ActronAir all provide this coverage when installed by licensed dealers. Our installation workmanship is fully warranted. We are licensed dealers for all six major brands.

Get a Fast Quote
Complete the details below to help us quote accurately.

Customer Details

Job Details

Useful photos: switchboard, ceiling manhole, outdoor unit location. Max 5 images.

Plans may be available up to $15,000 at 0% interest, for terms up to 10 years, subject to approval and eligibility.

We'll review your details and contact you to confirm pricing.

Split System Guarantee

  • From $2,700 Installed
  • Same-Week Installation
  • 5-Year Manufacturer Warranty
  • Licensed Technicians
  • Free Quote

Rated 5.0 / 82 Reviews

5.0
Get Free Quote